Cricket Pitch Length

Watching a cricket match will raise a couple of questions that you’ll need answers to. For instance, how big is a cricket pitch? Is there a standard size or does every field vary according to certain factors, and so on.


It’s okay to be curious at some point as there are answers to these and more questions. Cricket has come a long way and is now embraced all over the globe. Let’s have a closer look at some of the most pertinent areas in regards to the cricket pitch.

Cricket Pitch Length

Cricket pitches all over the world have a standard measurement to go by. The cricket pitch length you should expect wherever you go is 20.12m. Why and how did they come to be?

When cricket was first birthed, there was an urgent need to accommodate every player in the field. The measurements were located, bearing in mind that each will need substantial space to play effectively.

However, this will not always be the case. These dimensions are dependent on the type of cricket game that’s in session. Behind the stumps is also covered, especially since the batting crease is quite involving.

1.22m is the expected dimension for both ends of the front stumps. Both sides of the middle stumps are supposed to be 1.32m.

The standard width of a cricket pitch that most cricketers are used to is 10 feet. Anything contrary to this is sure to distort the level of focus of the players during a match.

Maybe you can make some compromises when you practice on your own in your backyard. The cricket pitch is usually rectangular as this shape seeks the inclusivity of every player on the field.

Measurements are an integral part of cricket and must be adhered to in every game. They apply even when it comes to junior cricket. As the kids advance, adjustments are made so that they don’t get disoriented.

The good length area is that part of the field where the batsman is at a crossroads on whether he should go backward or forward. This uncertainty is brought about by a good length delivery. What’s that?
A good length delivery happens when a bowler delivers a shot that is a greater distance from the batsman. In most cases, the batsman is not sure whether to decline this shot or go for it.

Umpires will mark a good length area based on the standard size of 4 to 7 meters. These measurements are not conclusive as they are normally based on the surface of the cricket pitch. 

Some surfaces provide wonderful wicket spaces for a great bounce, while others are not enough to facilitate any bounces. This is a factor that determines whether a certain area on the cricket field can pass as a good length area.

Cricket Pitch Length Junior

Cricket is not just for the older folks that have more advanced knowledge of the game. In most cases, legends begin from childhood and must be well equipped.

That said, a junior cricket pitch does have dimensions too. Kids must be taught the measurements as well as everything that has to do with the junior cricket pitch.

The length has been undergoing critical changes over the years for the sole purpose of accommodating kids of all ages. Another reason it keeps changing is to make it more enjoyable for the kids.

For kids aged 15 years and under, 22 yards is sufficient. 12 years and under are better placed in a cricket field with a length of 19 yards.

This might be new even to long-serving cricketers, but it’s possible to measure a cricket pitch in footsteps. To be more precise, the standard cricket pitch length in footsteps is 22 footsteps.

Footsteps come in handy when the measuring equipment is nowhere close by. The international cricket dimensions are upgraded and put in place for other cricket players to follow.

22 footsteps are enough to get the batsman and bowler through every match. When these two positions are sorted out, all others fall in place. It’s up to the umpires, captains, and coaches to ensure that the measurements in footsteps are accurate.

Beginners have to set ample time aside to practice and familiarize themselves with the basics of pitch dimensions. Without this knowledge, they are bound to fail and begin on a sour note.

Cricket Crease Length

As you watch a cricket match, you notice white lines spread across some parts of the cricket field. They all make sense and have crucial roles to play, hence their presence on the field.

There are 4 creases in a cricket pitch. Each of them is allocated a dimension that is measured for its function. The bowling crease is 2.64 m long. Anything longer than this only interferes with the logistics on which it’s founded.

The popping crease is measured at a standard length of 6 feet on both sides. Then there are 2 return creases that are the edges on the inside of the markings you see. 

The markings and measurements are made from the popping (batting) crease, and the length can be considered as inexhaustible. The return creases are normally at right angles to the batting crease. The distance marked between these two regions is 4 feet and 4 inches.

The age-old question surrounding the measurement criteria is how the cricket field measurements come into existence. All the answers lie in the laws of cricket.


Each law in cricket governs certain areas that are bound to bring discrepancies in the course of the game. The laws are useful for maintaining order and ensure that all flows smoothly.


Imagine playing cricket on a huge field with no markings or measurements. You’ll get lost even before you get to the middle. Each of the 42 laws of cricket touches on every area that is said to be sensitive.
At the end of the day, cricket is served to you, the cricketer, to munch and savor the awesome taste.



    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Recent Posts
    Recent Comments

      You can enable/disable right click